 It should be borne in mind that ordinarily in making a crosssection we show not only those parts of the object which lie in the plane in which it is supposed to be cut, but also all which lie back of that plane. Sometimes it is desirable to show the inside...  Mechanical Drawing: Instruction Paper - Page 8by Ervin Kenison - 1906Full view - About this book
 | 1902 - 486 pages
...the outside of a piece on the same view. Fig. GO shows the same piece as in Fig. 58, but in Fig. 60 the left-hand half of the lower view is an elevation...being made along the lines CA and CB of the plan view. Of course this combination of an elevation and cross-section can be used only when the right-hand and... | |
 | American School (Chicago, Ill.) - Engineering - 1903 - 414 pages
...the outside of a piece on the same view. Fig. 60 shows the same piece as in Fig. 58, but in Fig. 60 the left-hand half of the lower view is an elevation...were cut away, the cuts being made along the lines С A and С B of the plan view. Of course this combination of an elevation and cross-section can be... | |
 | American School (Chicago, Ill.) - Engineering - 1906 - 580 pages
...parts of the object which lie in the plane in which it is supposed to be cut, but also all which lie back of that plane. Sometimes it is desirable to show...cut away, the cuts being made along the lines CA and CH of the plan view. Of course this combination of au elevation and cross-section 9 can be used only... | |
 | American School (Chicago, Ill.) - Engineering - 1906 - 586 pages
...parts of the object which lie in the plane in which it is supposed to be cut, but also all which lie back of that plane. Sometimes it is desirable to show...of it were cut away, the cuts being made along the Hues CA and CB of the plan view. Of course this combination of an elevation and cross-section can be... | |
 | Howard Monroe Raymond - Machine-shop practice - 1906 - 716 pages
...Sometimes it is desirable to show the inside and the outside of a piece on the same view. Fig. 10 sliows the same piece as in Fig. 8, but in Fig 10 the left-hand...center line. This is as if one-quarter of it were cut awav, the cuts being made along the lines CA and CB of the plan view. Of course this combination of... | |
 | 1907 - 474 pages
...parts of the object which lie in the plane in which it is supposed to be cut, but also all which lie back of that plane. Sometimes it is desirable to show...being made along the lines CA and CB of the plan view. Of course this combination of an elevation and cross-section can be used only when the right-hand and... | |
 | Howard Monroe Raymond - 1908 - 426 pages
...parts of the object which lie in the plane in which it is supposed to be cut, but also all which lie back of that plane. Sometimes it is desirable to show...being made along the lines CA and CB of the plan view. Of course this combination of an elevation and cross -section can be used only when the right-band... | |
 | Heating - 1909 - 412 pages
...parts of the object which lie in the plane in which it is supposed to be cut, but also all which lie back of that plane. Sometimes it is desirable to show...being made along the lines CA and CB of the plan view. Of course this combination of an elevation and cross-section r L H IS M u 3 H O lI OO U e M 8 H Ican... | |
| |
