Books Books
H with two faces parallel to V; the diagonal from the front upper right-hand corner to the back lower left-hand corner is indicated by the dotted line. Swing the cube around until the diagonal is parallel with V as shown in the second position. Here the...
Cyclopedia of Architecture, Carpentry and Building: A General Reference Work... - Page 129
by American School (Lansing, Ill.) - 1907

## Cyclopedia of Engineering; a Complete Manual of Steam and Machine ..., Volume 4

1902 - 486 pages
...an axis through the lower right-hand corner until the diagonal is parallel to the horizontal plane, becoming thus parallel to both planes. The plan is...projection from the elevation and the preceding plan. The cube is next revolved about a vertical axis, ( the plan remaining the same size ) until the diagonal...

## Mechanical drawing

American School (Lansing, Ill.) - Engineering - 1903 - 414 pages
...an axis through the lower right-hand corner until the diagonal is parallel to the horizontal plane, becoming thus parallel to both planes. The plan is...projection from the elevation and the preceding plan. The is next revolved about a vertical axis, (the plan remaining the sanie size ) until the diagonal is...

## Modern Engineering Practice: A Reference Library..., Volume 11

American School (Chicago, Ill.) - Engineering - 1906 - 580 pages
...has been represented by two or more projections. Another system, called isometrical drawing, is used to show in one view the three dimensions of an object,...position the cube is swung around, using the corner 129 MECHANICAL DRAWING resting on the H as a pivot, until the diagonal is perpendicular to V but still...

## Cyclopedia of Drawing, Volume 1

American School (Lansing, Ill.) - Architectural drawing - 1906 - 426 pages
...in the second position. Here the front face is at the right. In the third position the lower end >f the diagonal has been raised so that it is parallel...position the cube is swung around, using the corner MECHANICAL DRAWING resting on the H as a pivot, until the diagonal is perpendicular to V but still...

## Cyclopedia of Drawing: A General Reference Work on Drawing and ..., Part 1

Drawing - 1906 - 424 pages
...in the second position. Here the front face is at the right. In the third position the lower end jf the diagonal has been raised so that it is parallel...of the two faces shown in the elevation. From this i»sition the cube is swung around, using the corner resting on the H as a pivot, until the diagonal...

## Modern Engineering Practice: A Reference Library..., Volume 11

American School (Chicago, Ill.) - Engineering - 1906 - 586 pages
...in the second position. Here the front face is at the right. In the third position the lower end 1f the diagonal has been raised so that it is parallel...projection, from the elevation and the preceding plan. Tim front face is now the lower of the two faces shown in the elevation. From this position the cube...

## Cyclopedia of Civil Engineering: Plane surveying; mechanical drawing

American School of Correspondence - Civil engineering - 1908 - 474 pages
...of Fig. 45, in which it rests on H with two faces parallel to V ; the diagonal from the front npper right-hand corner to the back lower left-hand corner...resting on the H as a pivot, until the diagonal is perpendiculai to V but still parallel to H. The plan remains the same, except as regards position;...

## Cyclopedia of Architecture, Carpentry and Building: Mechanical drawing ...

Architecture - 1909 - 468 pages
...has been represented by two or more projections. Another system, called isometrical drawing, is used to show in one view the three dimensions of an object,...this position the cube is swung around, using the comer 128 104 resting on the H as a pivot, until the diagonal is perpendiculai to V but still parallel...