...shall have a permissible variation of 7 per cent above size. Specifications for Mild Carbon Steel Tubes GENERAL. — 1. The general specifications, 1G1, shall...their applicability, a part of these specifications. USE. — 2. These tubes are suitable for all parts not heavily stressed, such as trailing edges and...

...an.imony. (b) No scrap shall be used other than that produced in the manurs' ow material speci n pla ified. Specifications for Soft Solder GENERAL. — 1. The...general specifications, 1G1, shall form, according to the r applicability, a part of these specifications. MATERIAL. — 2. Solder shall be made from new...

...International Aircraft Standards Board SPECIFICATIONS FOR FREE CUTTING OR SCREW MACHINE BRASS BARS. GENERAL. — 1 . The general specifications, 1G1 , shall form, according to their applicability, n purl of these specifications. USE. — 2. This mntorial is to he used for screw machine work; it...

...[International aircraft standards, 3X17. March, 1918] GENERAL. — i. The general specifications, iGi, shall form, according to their applicability, a part of these specifications. MATERIAL. — 2. The specific gravity of the aluminum alloy of this specification shall not be greater than 2.85. MANUFACTURE....

...below gauge. TABLE FOR ROUND HIGH STRENGTH STEEL WIRE. 2. SPECIFICATIONS FOR HIGH STRENGTH STEEL WIRE. GENERAL. — 1. The general specifications, 1G1, shall...applicability, a part of these specifications. MATERIAL. — 2. The wire shall be manufactured of either IASB standard steel No. 1065, No. 1070, or No. 1080, the compositions...

...from ¿>agc ,S7) SPECIFICATIONS FOR SOFT CARBON STEEL SHEET General i The general specifications, iGi, shall form, according to their applicability, a part of these specifications. Material ; The material for these sheets shall be chosen from the I. Л. SB standard steels listed below. The...