... smooth bottom, with a special groove cut in the bottom of the trench for each hub, in order to give the pipe a solid bearing on its entire length, and the soil well rammed on each side of the pipe. Plumbers' Handbook - Page 611by Samuel Edward Dibble - 1922 - 629 pagesFull view - About this book
| Rhode Island. State Board of Health - 1881 - 694 pages
...available, a concrete base should be provided in the trench. Special grooves should be cut for the sockets, in order to give the pipe a solid bearing on its entire length (see Fig. 1). All pipes should be laid in straight lines, all f- changes of direction should be effected... | |
| William Paul Gerhard - Plumbing - 1882 - 242 pages
...plain. When socket pipe is used, special grooves should be cut in the bottom of the trench for the hub, in order to give the pipe a solid bearing on its entire length. The pipes are laid with the socket pointing upgrade, the plain or spigot end of one pipe being inserted... | |
| Engineering - 1882 - 536 pages
...plain. "When socket pipe is used, special grooves should be cut in the bottom of the trench for the hub. in order to give the pipe a solid bearing on its entire length. The pipes are laid with the socket pointing upgrade, the plain or spigot end of one 268 HOUSE DRAINAGE... | |
| William Paul Gerhard - Plumbing - 1882 - 232 pages
...plain. "When socket pipe is used, special grooves should be cut in the bottom of the trench for the hub, in order to give the pipe a solid bearing on its entire length. The pipes are laid with the socket pointing upgrade, the plain or spigot end of one pipe being inserted... | |
| Pennsylvania. State Board of Health and Vital Statistics - Pennsylvania - 1903 - 490 pages
...each hub (in order io give the pipe * solid bearing on its entire length) and the soil well rammed 011 each side of the pipe. The spigot and hub ends shall be concentric. The space between the hub and pipe shall be thor oughly filled with the best cement mortar,... | |
| Iowa. State Department of Health - Public health - 1893 - 834 pages
...and outer surfaces may be used, laid on a smooth bottom, with a special groove cut in the bottom of trench for each hub (in order to give the pipe a solid bearing on its en tire length), and the soil well rammed on each side of the pipe; the spigot and hub ends shall be... | |
| New Haven, Connecticut - New Haven (Conn.) - 1897 - 632 pages
...their fittings, must be sound, free from flaws, splits or cracks, laid on solid bottom with a groove for each hub, in order to give the pipe a solid bearing throughout its entire length, and with a grade of not less than one-quarter ORDINANCES. inch to the... | |
| Charles Value Chapin - Communicable diseases - 1900 - 996 pages
...perfectly burned and well glazed over the entire inner and outer surfaces, may be used if laid on a smooth bottom with a special groove cut in the bottom...side of the pipe. The spigot and hub ends shall be concentric. The space between the- hub and the pipe must be thoroughly lilled with cement mortar, made... | |
| Charles Value Chapin - Communicable diseases - 1900 - 970 pages
...perfectly burned and well glazed over the entire inner and outer surfaces, may be used if laid on a smooth bottom with a special groove cut in the bottom...each side of the pipe. The spigot and hub ends shall l>e concentric. The space between the hub and the pipe must be thoroughly tilled with cement mortar,... | |
| Puerto Rico. Governor - 1901 - 474 pages
...and outer surfaces, may be used, laid on a smooth jottorn, with a special groove cut in the bottom of trench for each hub [in order to give the pipe a solid...side of the pipe. The spigot and hub ends shall be concentric. The space between the hub and pipe shall be thoroughly filled with ;he best cement mortar,... | |
| |