 | ROLLA C. CARPENTER - 1906 - 1274 pages
...test-pieces shall be similarly and simultaneously treated with the material before testing. Plates. — Wherever practicable the rolled surfaces shall be retained on two opposite sides of the test-piece. The elongation shall be measured on a standard test-piece having a gauge-length of 8 inches.... | |
 | Rolla Clinton Carpenter, Herman Diederichs - Building materials - 1911 - 1170 pages
...test-pieces shall be similarly and simultaneously treated with the material before testing. Plates. — Wherever practicable the rolled surfaces shall be retained on two opposite sides of the test-piece. The elongation shall be measured on a standard test-piece having a gauge-length of 8 inches.... | |
 | Rolla Clinton Carpenter, Herman Diederichs - Building materials - 1913 - 1352 pages
...test-pieces shall be similarly and simultaneously treated with the material before testing. Plates. — Wherever practicable the rolled surfaces shall be retained on two opposite sides of the test-piece. The elongation shall be measured on a standard test-piece having a gauge-length of 8 inches.... | |
 | Albert Edward Seaton, Henry Morrison Rounthwaite - Marine engineering - 1917 - 772 pages
...test-pieces shall be similarly and simultaneously treated with the material before testing. Plates, Angles, and Tee Bars. — Wherever practicable the rolled...surfaces shall be retained on two opposite sides of the test-piece. The elongation shall be measured on a Standard test-piece having a gauge length of 8 inches.... | |
 | Charles Haynes Hughes - Naval architecture - 1917 - 774 pages
...cold flanging, the tensile strength shall be between 26 and 30 tons per square inch. The elongation measured on a standard test piece having a gauge length of 8 ins., shall not be less than 20% for material .375 inch in thickness and upwards, and not less than... | |
 | Johann Phillip Edmond Charles Stromeyer - Boilers, Marine - 1919 - 468 pages
...the elongation may be 3 per cent, but not more than 3 per cent., below the above-named elongations. Wherever practicable the rolled surfaces shall be retained on two opposite sides of the test piece. Where stay bars are tested on a gauge length of four times the diameter (test piece F) the elongation... | |
 | American Bureau of Shipping - Shipbuilding - 1922 - 394 pages
...treated before dispatch the test specimens shall be similarly and simultaneously treated before testing. Wherever practicable the rolled surfaces shall be retained on two opposite sides of the test specimens; any straightening of test specimens which may be required shall be done cold. The parallel... | |
 | Lloyd's Register of Shipping - Shipbuilding - 1922 - 348 pages
...with the material before testing. 2. Plates. — (a) Wherever practicable the rolled surfaces are to be retained on two opposite sides of the test piece. The elongation is to be measured on a Standard test piece having a gauge length of 8 inches. (b) For material more... | |
 | 1928 - 378 pages
...treated before despatch the test pieces shall be similarly and simultaneously treated before testing. Wherever practicable the rolled surfaces shall be retained on two opposite sides of the test piece; any straightening of test pieces which may be required shall be done cold. The parallel pail of the... | |
 | Lloyd's Register of Shipping - Shipbuilding - 1920 - 318 pages
...pieces shall be similarly and simultaneously treated with the material before testing. Plates : — Wherever practicable the rolled surfaces shall be...of the test piece. The elongation shall be measured ou a Standard test piece having a gauge length of 8 inches. For material more than '875 in. in thickness... | |
| |
Wherever practicable, the rolled surfaces shall be retained on two opposite sides of the test piece. The elongation shall be measured on a standard test piece having a gauge length of 8 in. For material more than '875 in. 
