 In locating the figures, they should be placed a little above the center so that there will be sufficient space below to number the problem. The figures of the problems should first be drawn lightly in pencil and after the entire plate is completed the...  Mechanical drawing - Page 17by American School (Chicago, Ill.) - 1903Full view - About this book
 | 1902 - 486 pages
...center line and through these points draw vertical lines as shown in dot and dash lines on PL A TE 1 V. In these six spaces the six figures are to be drawn,...Given Straight Line. Draw the horizontal straight line AC about 3 inches long. With the extremity A as a center and any convenient radius (about 2 inches)... | |
 | Drawing - 1906 - 424 pages
...off 2| inches on both sides of the vertical center line and through these points draw vertical lines as shown in dot and dash lines on PLATE IV. In these...Given Straight Line. Draw the horizontal straight line AC about 3 inches long. With the extremity A as a center and any convenient radius (about 2 inches)... | |
 | American School (Chicago, Ill.) - Engineering - 1906 - 586 pages
...off 2] inches on both sides of the vertical center line and through these points draw vertical lines as shown in dot and dash lines on PLATE IV. In these...Given Straight Line. Draw the horizontal straight line AC about 3 inches long. With the extremity A as a center and any convenient radius (about 2 inches)... | |
 | American School (Lansing, Ill.) - Architectural drawing - 1906 - 426 pages
...off 2j inches on both sides of the vertical center line and through the.se points draw vertical lines as shown in dot and dash lines on PLATE IV. In these...Given Straight Line. Draw the horizontal straight line AC about 3 inches long. With the extremity A as a center and any convenient radius (about 2 inches)... | |
 | American School (Chicago, Ill.) - Engineering - 1906 - 580 pages
...appearance. In locating the figures, they should be placed a little above the center so that there will 1* sufficient space below to number the problem. The...Given Straight Line. Draw the horizontal straight line AC about 3 inches long. With the extremity A as a center and any convenient radius (about 2 inches)... | |
 | American School (Lansing, Ill.) - Architecture - 1907 - 360 pages
...off 2| inches on both sides of the vertical center line and through these points draw vertical lines as shown in dot and dash lines on PLATE IV. In these...Given Straight Line. Draw the horizontal straight line AC about 3 inches long. With the extremity A as a center and any convenient radius (about 2 inches)... | |
 | American School of Correspondence - Civil engineering - 1908 - 474 pages
...depends upon the pencilling. Keep the pencil points in good order at all times and draw lines p.raftly through intersections. GEOMETRICAL PROBLEMS. The following...Given Straight Line. Draw the horizontal straight line AC alwut 3 inches long. With the extremity A as a center and any convenient radius (about 2 inches)... | |
 | Frederick Eugene Turneaure - Civil engineering - 1909 - 456 pages
...off 2| inches on both sides of the vertical center line and through these points draw vertical lines as shown in dot and dash lines on PLATE IV. In these...Given Straight Line. Draw the horizontal straight line AC about 3 inches long. With the extremity A as a center and any convenient radius (about 2 inches)... | |
 | Architecture - 1909 - 468 pages
...should first be drawn lightly in pencil and after the entire plate is completed the lines should he inked. In pencilling, all intersections must be formed...so that he can apply the principles in later work. I'ROHLKM I. To Bisect a Given Straight Line. Draw the horizontal straight line А С aliont 3 inches... | |
 | American School of Correspondence - Civil engineering - 1909 - 476 pages
...as the accuracy of the results depends upon the pencilling. Keep the pencil points in good order .it all times and draw lines exactly through intersections....do them blindly, but should understand them so that lie can apply the principles in later work. PROBLEM I. To Bisect a Given Straight Line. Draw the horizontal... | |
| |
