## Carpentry and Contracting: A Practical Reference Work on Carpentry, Building Superintendence, Etc, Volume 2American technical society, 1919 - Building |

### Other editions - View all

Carpentry and Contracting; a Practical Reference Work on Carpentry ..., Volume 4 American Technical Society No preview available - 2013 |

### Common terms and phrases

angle architect axis base blueprint body bottom building called center line circle close color complete connection construction corner curve cylinder diameter dimensions distance dividers dotted drawing drawn edge elevation end view equal example faces feet figures finished flashing floor frame front view gear give given height hole horizontal inches indicated intersection iron isometric laying length letters light lines located lower machine marked material measure Mechanical metal method necessary object obtained opening parallel pattern pencil perpendicular piece placed plane Plate position practice Problem projection pyramid radius rendering represents roof scale shadows shape sheets shown in Fig shows side sketch space square steel straight line surface T-square triangle true upper usually various vertical wall width window

### Popular passages

Page 114 - A sphere is a solid bounded by a curved surface, every point of which is equally distant from a point within called the center.

Page 117 - Cycloid. The cycloid is a curve generated by a point on the circumference of a circle which rolls on a straight line tangent to the circle.

Page 109 - A Circle is a plane figure bounded by a curved line every point of which is equally distant from a point within called the center.

Page 2 - BAKER Professor of Civil Engineering, University of Illinois, Author of " A Treatise on Masonry Construction.

Page 134 - ... into any number of equal parts (twelve for instance) and through the points of division H, I, L, M, and N, draw arcs having G as a center. With the dividers...

Page 82 - They should not fall short of the guide lines nor extend beyond them. As these letters are inclined they will look better if the inclination is the same for all. As an aid to the beginner, he can draw light pencil lines, about ^ inch apart, forming the proper angle with the parallel lines already drawn. The inclination is often made about 70 degrees ; but as a 60-degree triangle is at hand, it may be used.

Page 187 - ... In Fig. 70, take especial notice of the shade lines. These are put on as if the group were made in one piece ; and the shadows cast by the blocks on one another are disregarded. All upper horizontal faces are light, all left-hand (front and back) faces light, and the rest dark. OBLIQUE PROJECTIONS. In oblique projection, as in isometric, the end sought for is the same — a more or less complete representation, in one view, of any object. Oblique projection differs from isometric in that one...

Page 174 - ... element is taken from the elevation A, of either contour element. All of the elements of the cone are of the same length, so when the cone is rolled each point of the base as it touches the plane will be at the same distance from the vertex. From this it follows that the development of the base will be the arc of a circle of radius equal to the length of an element. To find the length of this arc which is equal to the distance around the base, divide the plan of the circumference of the base...

Page 95 - The letters should be pencilled free hand and the student may use the 60-degree guide lines if he desires: The guide lines of the date, name and address are similarly drawn in the lower margin. The date of completing the drawing should be placed under Fig. 3 and the name and address at the right under Fig. 4- The street address is unnecessary. It is a good plan to draw lines...

Page 128 - O as a center and a radius of about 1 inch draw the given circle. Assume P some point outside of the circle about 2£ inches from the center of the circle.