Hidden fields
Books Books
" Tables opposite the boiler pressure intended, but in no case should the valves be less than two inches in diameter. This applies to new vessels or vessels which have not received a passenger certificate. When, however, the valves are of the common description,... "
A Manual of Marine Engineering: Comprising the Designing, Construction, and ... - Page 444
by Albert Edward Seaton - 1886 - 479 pages
Full view - About this book

The Marine Steam Engine: A Treatise for the Use of Engineering Students and ...

Richard Sennett - Marine engines - 1885 - 750 pages
...diameter. When, however, the valves are of the common description, and are made in accordance \vith the tables, it will be necessary to fit them with...should be submitted to the Board for consideration. SAFETY VALVE AREAS. The safety valves should be fitted with lifting gear, so arranged that the two...
Full view - About this book

Steam Boilers: A Practical Treatise on Boiler Construction and Examination

Joshua Rose - Steam-boiler inspection - 1888 - 312 pages
...condition for that time. 78. The area per square foot of fire-grate surface of Government safecy-valves, or. (when there is more than one Government safety-valve...should be submitted to the Board for consideration. In ascertaining the fire-grate area, the length of the grate should be measured from the inner edge...
Full view - About this book

The Practical Engineer's Hand-book: Comprising a Treatise on Modern Engines ...

Walter S. Hutton - Mechanical engineering - 1892 - 558 pages
...When, however, the valves are of the common description and are made in accordance with the Table, it will be necessary to fit them with springs having...valves considerably larger than those found by the Table, the design of the valves proposed for such boilers should be submitted to the Board for consideration....
Full view - About this book

Marine Boiler Management and Construction: Being a Treatise on Boiler ...

Johann Phillip Edmond Charles Stromeyer - Steam-boilers, Marine - 1893 - 386 pages
...following tables opposite the boiler pressure intended, but in no case should the valves be less than two inches in diameter. This applies to new vessels or...moderate limits ; and as boilers with forced draught may require valves considerably larger than those found by the tables, the design of the valves proposed...
Full view - About this book

A Pocket Book of Marine Engineering Rules and Tables: For the Use of Marine ...

Albert Edward Seaton, Henry Morrison Rounthwaite - Marine engineering - 1894 - 460 pages
...following Tables opposite the boiler pressure intended, but in no case should the valves be less than two inches in diameter. This applies to new vessels or...moderate limits ; and as boilers with forced draught may require valves considerably larger than those found by the Tables, the design of the valves proposed...
Full view - About this book

A Pocket Book of Marine Engineering Rules and Tables: For the Use of ... All ...

Albert Edward Seaton - 1895 - 478 pages
...received a passenger certificate. When, however, the valves are of the common description, and ave made in accordance with the Tables, it will be necessary...moderate limits ; and as boilers with forced draught may require valves considerably larger than those found by the Tables, the design of the valves proposed...
Full view - About this book

The Marine Steam Engine ...

Richard Sennett - Marine engines - 1898 - 574 pages
...When, however, the valves are of the common description, and are made in accordance with the table, it will be necessary to fit them with springs having...valves considerably larger than those found by the table, the design of the valves proposed for such boilers, together with the estimated coal consumption...
Full view - About this book

A Manual of Marine Engineering: Comprising the Design, Construction, and ...

Albert Edward Seaton - Marine engineering - 1907 - 792 pages
...When, however, the valves are of the common description, and are made in accordance with the table, it will be necessary to fit them with springs having...means to keep the accumulation within moderate limits. When forced draught is used, the area of the safety-valves should not be less than that found by the...
Full view - About this book

Boiler Explosions, Collapses and Mishaps: Being a Summary of the Causes of ...

Edward Johnson Rimmer - Steam-boiler explosions - 1912 - 172 pages
...common description, and are made in accordance with the table, it will be necessary to fit them either with springs having great elasticity, or to provide...means to keep the accumulation within moderate limits. When forced draught is used, the area of the safety-valve should not be less than that found by the...
Full view - About this book

Marine Boiler Management and Construction: Being a Treatise on Boiler ...

Johann Phillip Edmond Charles Stromeyer - Steam-boilers, Marine - 1914 - 440 pages
...are made in accordance with the table, it will be necessary either to fit them with springs hiving great elasticity, or to provide other means to keep the accumulation within moderate limits. Safety-Valve Areas (Natural Draught) Boiler Press tire Area of Valve per Square Foot of Fire Orate...
Full view - About this book




  1. My library
  2. Help
  3. Advanced Book Search
  4. Download EPUB
  5. Download PDF