GB/T 8358-2014 Translated English of Chinese Standard (GBT 8358-2014, GB/T8358-2014, GBT8358-2014): Steel Wire Rope - Determination of Measured Breaking ForceThis Standard specifies the terms and definitions, test principles, specimen preparation, test equipment, test procedures, test report and the like for determination of measured breaking force of steel wire rope. This Standard is applicable to the determination of measured breaking force of various steel wire ropes. Method of alloy poured socketing is suitable for the steel wire rope with diameter greater than and equal to 6mm or 0.5mm; method of resign pouring and method of ferrule pressing are suitable for all types of steel wire rope; method of direct gripping is suitable for the single-strand steel wire rope, it is also suitable for other structures of steel wire rope; the method of wrapping is suitable for the steel wire rope with diameter no greater than 20mm. |
Common terms and phrases
adjust the cleaned alloy poured socketing broom head steel clamping length cleaned broom head cone-shaped end core steel wire determination of measured diameter of steel diameter of wrapping direct gripping document end to fill ends of specimen ferrule pressing fiber core steel firmly bundle force of steel Force-Measuring System GB/T grip holder head steel wire i.e. bundle i.e. directly jaw seats low melting point measured breaking force Method of alloy method of direct method of ferrule method of resign method of tensile method of wrapping minimum breaking force minimum test length mold nominal diameter Pouring Specimen preparation by method resign pouring room temperature rope groove rope is broken rope strand rope with diameter same-diameter Shanghai single-strand steel wire Specimen preparation spread the ends Standard steel wire rope steel wire surface tensile test carried terms and definitions test force tester wire rope specimen wrap the specimen wrapping test wheel Zhang